PRODUCT DESCRIPTIONS


  • PC-149 - Deep Penetrating Epoxy Concrete Primer/Sealer

    A clear two component, polyamide epoxy primer/sealer, PC-149 is a one or two coat system designed to seal and protect concrete from water and chemical prentration. PC-149 is also used as a primer coat under our high performance, thin film coating systems.
    USDA Approved


    PC-1702 - VOC Compliant 100% Solids Epoxy Concrete Primer

    A solvent free, low viscosity, deep penetrating primer/sealer used as a primer under epoxy grouts and overlayments, linings and high performance thin film coating systems or as a clear amber sealer over concrete.A low temperature cure resin with outstanding chemical resistance. USDA Approved


    CM-15 - High Build VOC Compliant Epoxy Mastic Coating

    A two component, high solids, high gloss amine adduct cured epoxy coating. A tile-like finish with excellent abrasion and chemical resistance. A protective coating for concrete and steel. Available in a number of color. Can be brushed, rolled or sprayed. VOC compliant.
    USDA Approved


    PC-240 - VOC Compliant Water Based Epoxy Coating

    PC-240 is a two component, low odor, non-toxic water based epoxy coating. PC-240 has a tile-like high gloss finish with excellent durability. Ideal for walls, ceilings, and equipment. Available in a wide range of colors. VOC compliant.
    USDA Approved


    PC-270 - A brilliant, Non yellowing White Polyester Epoxy Finish Coat.

    PC-270 Polyester Epoxy is a hard, high gloss, tile-like finish which has outstanding wash and scrubability. The white and pastel colors are non-yellowing and will provide excellent color stability.

    Used in breweries, dairies, meat packing, canning, packaging, poultry, bottling, and most food processing plants. Also used in many institutions such as schools, hospitals, cafeteria, kitchens, and many commercial businesses.
    USDA Approved



  • PC-517 - A High Chemical Resistant Internal Tank Lining

    A two component, high solids, high build, one coat exoxy mastic. PC-517 has a high gloss tile-like finish and is 92% solids by volume. It is glass filled for high abrasion and impact resistance. For concrete and steel.

    PC-517 is a VOC compliant internal tank lining coat as well as an excellent secondary containment coating and is used as a glaze coat for floors and walls.

    Used as an internal tank lining in a variety of chemical services, for concrete clarifiers, concrete floors and walls, chemical plants, marine installations, pulp and paper mills, to name a few.
    USDA Approved


    PC-555 - Chemliner Novolac VOC Compliant Epoxy Coating

    PC-555 is a two component, high solids, Novolac Epoxy Coating. Using the Novolac resin enables the highest performance for chemical resistance. Resistant to concentrated sulfuric acid and HCL. Ceramic filled for maximum abrasion and impact resistance. Recommended for concrete and steel.
    USDA Approved



  • PC-590 - A 100% Solids, Solvent Free, Wet Surface Cure Epoxy.

    PC-590 is a "Zero" V.O.C., moisture insensitive, two component, solvent free Epoxy that can be applied to wet surfaces and under damp or high humidity conditions. PC-590 will, in fact, cure under water. This Epoxy Mastic is self-priming and can be applied 10-15 dry mils in one coat. Can be sprayed, brushed or rolled.

    Used on wet end of paper machines, cooking towers, marine splash zones, sweating pipes and tanks, to name a few applications.
    USDA Approved



  • PC-600 - A Non-Skid Epoxy Floor Coating

    PC-600 is a heavy-duty ready to use non-skid epoxy coating that provides a tough, hard, non-skid finish on concrete or steel surfaces. PC-600 helps provide against fresh and salt water, caustics, and most industrial chamicals and solvents. Easy to apply by roller, trowel or squeegee on interior or exterior surfaces.

    Used as non-skid for warehouse floors, aisle-ways, parking decks, ramps, tank roofs, marine platforms, bridges, loading docks, steps, production areas, processing aress, garages, to name a few.


  • PC-636 - A Low Temperature, Fast Cure Epoxy Mastic

    PC-636 is a two component, high build Amine Cured Epoxy that will cure down to 25°F. This fast setting, surface tolerant Epoxy has excellent adhesion to marginally prepared surfaces, and depending on temperature, can be recocated the same day. PC-636 has excellent chemical, abrasion, and impact resistance. Available in most industrial colors.

    Used in a wide range of industrial and marine applications on steel and concrete surfaces in applications such as internal linings, paper machines, cooling towers, bridges, concrete floors, clarifiers, to name a few.
    USDA Approved



  • PC-4460 - ACRO Epoxy Coating for Potable Water Service

    Fast drying epoxy coating that meets American Water Works Association Specification D102 and C210. Approved under ANSI/NSF Standard 61. Conforms to Title 21 CFR 175.300 of the United States Food and Drug Administration and United States Department of Agriculture requirements for coatings in contact with food and drinking water.
    USDA Approved



  • MCU-100 - A rust treating Primer with recoat time of 2-4 hours.

    MCU-100 Moisture Cured Urethane is a one component, low temperature cure Primer designed to be applied to rusty steel surfaces. MCU-100 is also an excellent aluminum finish coat. Can service 400°F dry heat. Designed for non-blasted steel surfaces, and a quick recoat time; 2 hours at 75°F. Low temperature cure down to 18°F.
    USDA Approved



  • CT-352 - A CRU Chemical Resistant Polyester Polyurethane Finish.

    CT-352 is a two component polyester aliphatic isocyanate polyurethane with excellent chemical resistance, gloss and color retention. This premimum coating provides outstanding abrasion and impact resistance. CT-352 produces a tough, wear resistant film with excellent weathering properties.

    Used as topcoat for industrial warehouse and production area floors, aircraft hangers, structural steel tanks and vessels which are exposed to strong chemicals.

    NOTE:
    Avilable in a clear, our CT-332 CRU urethane is used to upgrade pigmented epoxies to higher abrasion and impact resistance.


  • CT-370 - VOC Compliant High Build Polyurethane Enamel.

    A two component, high solids, high guild polyurethane enamel. CT-370 has a high gloss, tile-like finish. Being an aliphatic polyurethane, it has excellent resistance to chalking and fading. The best product for color retention.
    USDA Approved



  • MCU-104 - A single-component Moisture Cured Zinc Rich Urethane.

    MCU-104 is a single-component Moisture Cured Zinc Rich Urethane Primer that provides the maximum corrosion protection to carbon steel surfaces. The high Zinc loading of MCU-104 imparts excellent resistance to rust formation and corrosion undercoating. This product can be applied at low temperatures, even below freezing, and in cold, damp conditions with humidities up to 99%. Ideal for marginally prepared steel surfaces.

    MCU-104 Zinc Rich Urethane is used for carbon steel production in a wide variety of industries from chemical plants, pulp and paper mills, utilities to barges, marine structures, waste water treatment facilities, and many other applications.

    PC-1000 - VOC Compliant Epoxy Amine Grout Resin

    A 100% solids, two component modified amine epoxy resin. A low viscosity resin used with silica sand for patching and troweling on concrete. An economical system for patching in aisle-ways, warehouses and production areas. Available in prepackaged kits.
    USDA Approved



  • PC-1500 - A Caustic and Acid Resistant Epoxy Novolac

    PC-1500 is a 100% solids, solvent free, Epoxy Novolac resin which provides excellent chemical resistance to acids, alkalis and most aromatic and aliphatic solvents. PC-1500 will protect against 93-98% sulfuric acid, 37% HCL, 70% sodium hydroxide. This resin also provides excellent abrasion and impact resistance. PC-1500 can be applied by a roller or a broadcast "seed-in" system on concrete surfaces. PC-1500 is USDA approved.

    Used for restoration and protection in secondary containments, trenches, pump pads, sumps, battery rooms, loading docks and other concrete structures subjected to extreme chemical attack.

  • PC-1800 - A 100% Solids Clear Self-Leveling Epoxy Floor Coat.

    PC-1800 Clear Epoxy produces a hard, durable, tile-like high gloss floor finish. Easy to apply by roller or squeegee to 10-15 mils DFT in one coat. PC-1800 is a self-leveling coating that is applied at 10-60 mils dry. A 100% solids coating, free of solvent and low odor, PC-1800 is ideal for confined areas where solvent odors are objectionable. Excellent system over vacuum shot blasted floors. Meets all EPA and other air pollution regulations.


  • PC-1850 - A 100% Solids Pigmented Self-Leveling Epoxy Floor Coat.

    PC-1850 Epoxy produces a hard, durable, tile-like high gloss floor finish. Easy to apply by roller or squeegee to 10-15 mils DFT in one coat. PC-1850 is a self-leveling coating that is applied at 10-60 mils dry. A 100% solids coating, free of solvent and low odor, PC-1850 is ideal for confined areas where solvent odors are objectionable. Excellent system over vacuum shot blasted floors. Meets all EPA and other air pollution regulations.

    Used in many industrial, food processing, institutional and commercial applications.
    USDA Approved


  • CF-613 - A 100% Solids Epoxy Mastic Crack Filler

    PC-613 is a moisture insensitive, low modulus epoxy mastic paste designed to patch or resurface horizontal, vertical, or overhead cracks or spalled conctete areas. This convenient 1:1 mix can be applied up to 2" thick on vertical surfaces, and has excellent chemical and abrasion resistance. Cures in the presence of moisture.

    Used in waste and chemical clarifiers, cooling towers, sumps, drainage ditches, ramps, pump pads and other concrete structures subjected to extreme chemical attack. Used to patch "bug" holes, build berms and fill badly exposed aggregate surfaces.

  • PC-621 - A Semi-Flexible Epoxy Joint Sealer

    CF-621 is a 100% Solids, pourable, Self-Leveling Epoxy designed to fill saw cut/control joints and cracks in concrete slabs on grade. It is formulated from moisture insensitive polymers which will cure in the presence of moisture. Ideal for use with steel wheel and fork lift traffic. CF-621 has up to 150% elongation to help relieve stress from joint movement. Excellent water tight bond to concrete.

    Used to fill saw cut/control joints and cracks in a wide variety of industries, institutions and commercial applications.
    USDA Approved