FlexSeal Logo

FLEXIBLE SEAL BRUSH GRADE SEALANT

DESCRIPTION

A solvent based, single component, primerless, paintable, modified KratonoŽ elastomeric mastic coating to be applied by brush or rollercoat.

FLEXIBLE SEAL Brush Grade is a high performance, above grade material used to seal narrow cracks, small holes, and seams on steel, glass, aluminum, concrete, wood, brick, clay, and tile substrates where working with a sealant cartridge is excessively time consuming.

FLEXIBLE SEAL Brush Grade resists rain immediately providing instant above grade waterproofing.

BASIC USES

FLEXIBLE SEAL Brush Grade may be used in the following industries: Air conditioning systems, buildings, recreational vehicles, gutters and downspouts, mobile homes, roofing installation and repair, siding installation, skylights and windows, waterproofing and dueling.

PRODUCT OPTIONS

FLEXIBLE SEAL Brush Grade is available in a very high solids formula, (300 grams/liter - V.O.C.), to comply with local V.O.C. ordinances; or, In an economical lower solids version for areas where V.O.C. ordinances are nonexistent. Available colors are clear and white.

APPLICATION

FLEXIBLE SEAL Brush Grade should be applied over sound, clean, dry surfaces using a stiff brush, short nap roller, trowel or squeegee, at a rate of 1 gallon per 50 square feet minimum for optimum aging and waterproofing. Resultant dry sealant should be 20 dry mils minimum. Larger cracks and holes may be bridged by embedding polyester mesh in the FLEXIBLE SEAL.

PRODUCT PRECAUTIONS

WARNING! These products contain petroleum hydrocarbon solvents and/or chlorinated hydrocarbon solvents. Refer to Individual product MATERIAL SAFETY DATA SHEETS for proper safety and handling information.

Back to FlexSeal Brush Grade Main Page


Seller makes no warranty of any kind, express or implied, as to the merchantability, fitness for any particular purpose, or any other matter with respect to this product. Since conditions of use are beyond seller's control, buyer assumes all risk of use of this product. Under no circumstances will seller be liable for consequential or incidental damages arising out of the use of this product. Seller's sole obligation shall be to replace the product if found to be defective. It is the user's responsibility to determine the suitability for use of this product under the conditions present at the time of application. KRATONŽ is a registered trademark of SHELL OIL COMPANY.